loading

Organized by cause → solution → cost, so homeowners can check it themselves.

Self-Apply vs. Pro Asphalt Sheet Waterproofing

Asphalt sheet waterproofing installation

If you notice water leaking from your roof or basement walls, asphalt sheet waterproofing is often the first thing that comes to mind. However, when you start looking into it, you'll find so many different materials and methods that it can be confusing to know where to start.

In this post, we're breaking down the scenarios where asphalt sheet waterproofing is the right choice and providing a checklist of what you need to check before starting. We've put this together to help you decide whether to tackle the job yourself or hire a professional.

First, Determine If Asphalt Sheet Waterproofing is Right for Your Project

Asphalt sheet waterproofing works best for areas with a relatively large, continuous surface area that needs to be waterproofed. Typical examples include flat roofs, rooftops, or basement exterior walls where water might pool or seep through over time.

  • Check if the floor is flat or has a gentle slope.
  • See if there are too many joints or corners, and if so, if you have a plan to reinforce them.
  • Determine what the existing waterproofing material was and if it needs to be removed.
  • Since this method uses heat during installation, ensure there is adequate ventilation and no flammable materials nearby.

If you aren're unsure about any of these points, it's safest to have someone inspect the site before you begin any work.

Understanding the Difference Between Waterproofing Sheets and Waterproofing Layers

One area people often get mixed up on is the difference between the sheet itself and the overall waterproofing layer. The waterproofing sheet is the material used to create a seamless barrier, especially at seams, and it's different from roofing shingles. Just because a material has "asphalt" in its name doesn't mean it's the same for every product.

When choosing a waterproofing sheet, make sure you check the following:

  1. Whether the application method uses heat or if it's a self-adhesive type.
  2. How well it matches your current flooring material.
  3. If the overlap width and seam treatment methods are clearly explained.

Why Surface Prep is Key to Successful Waterproofing

If the surface where you're laying the sheet is uneven, dusty, or greasy, you're setting yourself up for problems down the road. Getting the base perfectly clean and smoothing out any cracks or edges is the most critical step.

  • Use patching material to fill in any cracks or broken areas, making the surface level.
  • Clear out the areas around drains and scuppers to ensure water can flow freely.
  • Mark any exposed pipes or railing posts that will need extra reinforcement.
  • If it's raining or the surface is wet, postpone the work.

Aspahlt Sheet vs. Polyurea Waterproofing: Which is Right for You?

A lot of people consider polyurea waterproofing as an alternative to asphalt sheets. Polyurea is applied as a liquid that hardens, which makes it great for sealing complex shapes or tight corners without gaps. On the other hand, for large, flat areas, the sheet method is excellent for creating a consistent, finished waterproof layer.

FeatureAsphalt Sheet WaterproofingPolyurea Waterproofing
Best ForLarge, flat roofs or basement wallsComplex shapes with many corners
Application MethodLaying sheets and sealing seamsApplying liquid and letting it cure
Things to Watch Out ForSeam integrity and heat application safetyApplication thickness, temperature, and humidity

Don't Mix Them Up: Bathroom Sheet vs. Roof Sheet

The waterproofing sheets you find for bathrooms or showers are usually designed for thin surfaces on walls or floors. These are completely different from roofing asphalt sheets in terms of thickness, how they stick, and whether they require heat. Be careful not to mix them up! If you're dealing with a leak in the bathroom, you should check the plumbing connections first.

DIY vs. Hiring Pros: How to Decide Who Should Do the Job

If you're tackling a small area and the product is a self-adhesive type that doesn't require heat application, you might be able to do it yourself. However, for large jobs like a roof that involves heat application, it's safer to hire a company with experience. Since the cost changes based on the area, whether demolition is needed, the condition of the surface, and the grade of materials, make sure to get quotes from several places and compare the details.

Frequently Asked Questions

What is the general process for applying asphalt sheet waterproofing?

Typically, you start by preparing the surface and applying a primer. Then, you lay the sheets in sequence, overlapping them as specified, and finally reinforce the seams and corners. The exact steps vary depending on the materials and the construction method, so following the product's installation guide is crucial.

Can I install bathroom waterproofing sheets myself?

For small sections of a bathroom wall or floor, you can certainly use self-adhesive sheets. However, if the leak is actually coming from the plumbing or the grout, the sheets alone won't fix it, so you need to check the source of the leak first.

Do I need to inspect the area after the waterproofing work is done?

Yes, it's wise to check the seams, corners, and areas around drains again after a couple of rainstorms have passed. Catching any small lifting or bubbling early on can save you a lot of hassle and money later.

If you're seeing water stains on your roof or walls right now, take note of the surface condition, the total area, and the number of seams, just like the checklist above. Taking those notes and getting quotes from two or three different companies will make it much clearer which method is right for your situation.